Categories

System hiccups and false alarms can be frustrating, and more importantly, could prevent your home’s security from doing its job effectively. Fortunately, most problems, from dead batteries to false alarms, are simple to remedy. Explore our suggestions for troubleshooting your home alarm system in New Orleans. We’ll help you keep your household shielded and your system running smoothly.

Test Your Home Security System In New Orleans

One of the most sensible ways to troubleshoot your property’s security is to test it yourself! Modern systems allow you to place them in test mode to prevent you from triggering an emergency call. After switching to test mode, take these steps:

• Turn on your system as you would when going out.
• Open a door or window protected by a contact sensor, or try to set off something else. Shut the door or window once you’re done so it doesn’t trip the alarm when you leave test mode.
• Permit the alarm to go off for 60 seconds to make sure a message is sent to the security provider and an entry is made in the alarm activity log.
• Continue testing equipment as needed
• Review the system activity log to validate proper function.

Don’t worry, monitoring professionals can see that your alarm system is involved in a test. Be sure to switch out of test mode when done. It’s wise to test once a month or anytime you adjust your home’s internet or phone provider.

Evaluate The Placement And Condition Of Motion Detectors

Although an crucial part of your alarm system, motion detectors are notorious for false alarms. You can help prevent them with a few straightforward troubleshooting steps.

• Do a visual inspection. Are there things that could shift within the path of the sensor, like a curtain taken by a breeze?
• Is the sensor clean? Cobwebs, dirt, and debris can lead to malfunctions. Make sure the sensor is clean.
• Does the motion detector have pet immunity you can enable? Some sensors can be configured to ignore pets weighing up to 100 pounds.
• When was the battery last replaced? A low battery may impact performance or result in false alarms.
• Is a heat source affecting the sensor? Too much heat from a fireplace, direct sun, or something else can cause an alarm.

Keep Batteries On Hand And Look Out For Low Battery Signals

One helpful perk of new home security systems is that they’ll alert you when batteries are getting low. If your system is equipped with a control panel or app, you’ll typically see notifications there. Depending on the alarm, you may detect an occasional beep when batteries are getting low. 

Contact sensors, smoke detectors, motion sensors, and other wireless tools have batteries that will have to be replaced every so often. It’s wise to keep batteries on hand and create a replacement schedule. Many systems also have a backup battery for the main control panel. This backup helps keep your system functioning if you have a power outage and should recharge once power is back online. If it fails to recharge, you will have to replace it.

Troubleshooting Is Easy With ADT Home Security In New Orleans 

As the top name in home security, ADT designs systems that offer unsurpassed protection and functionality. Getting into test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always get alerts when a sensor battery is low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfectly suited to your New Orleans home. Call (504) 291-4028 or complete our form today!